Lock, Hinge & Sealing Solutions for Cold Chain & Transport Equipment
Full hardware stack for refrigerated trucks, reefer trailers, ISO reefer containers, and walk-in cold rooms — SUS304/316 truck-body T-handles, 3-point cam-bar rod locks, anti-pilferage recessed cylinders, food-grade EPDM gaskets, and –40 °C low-temperature stainless butt hinges. Engineered for ATP, FSMA STF, HACCP, ISO 1496-2 / 17712, GDP and IP65/66 cold-chain compliance.
Cold-chain hardware is not the same across asset classes. A 7.5-ton city distribution reefer cycles its rear door 30+ times a day and lives or dies by the door gasket and paddle latch. A long-haul reefer trailer needs a 3-point rod cam-bar that holds IP65 sealing and clears FSMA STF + ATP audits. An ISO reefer container demands SUS304/316 and ISO 17712 anti-tamper seals after 720 h of salt spray. A walk-in cold room mandates an internal release latch, food-grade EPDM, and –30 °C-rated stainless butt hinges. Yuxin Electric supplies the full hardware stack — whale-tail T-handles, 3-point rod locks, SUS304 hinges, food-grade gaskets — across all four cold-chain form factors, and engineers the niche items (–40 °C hinges, GDP audit-trail smart locks, drip-channel butt hinges) on demand.
Hardware Across 4 Cold-Chain Form Factors
Refrigerated Light Truck Body
Last-mile cold delivery — single rear roll-up or swing door, 1–2 side service doors, roof-mount chiller. Zinc + SUS304 hardware mix; cycle-life and food-grade gasketing dominate.
See hardware kit →Refrigerated Semi-Trailer
Long-haul reefer — dual rear swing doors with 3-point rod cam-bar, side access door, nose-mount Carrier/Thermo King unit. Anti-theft, FSMA STF, and ATP-aligned hardware.
See hardware kit →Reefer ISO Container
Intermodal sea + rail + road — ISO 1496-2 corner casting frame, end-mount reefer module, ISO 17712 anti-tamper seal locks. Salt-spray ≥720 h SUS304/SUS316 mandatory.
See hardware kit →Walk-In Cold Room
Fixed cold storage — sandwich-panel hinged or sliding door, drip-channel hinges, internal release latch (NFPA 101 life-safety), service hatches. Food-grade SUS304 throughout.
See hardware kit →Hardware Demand Matrix
Quantity per representative unit, indicative — actual specs vary by body builder, temperature class (chilled vs. frozen), and target market regulation.
| Hardware Category | A · Light Truck | B · Reefer Trailer | C · ISO Container | D · Walk-In |
|---|---|---|---|---|
| 3-point rod cam-bar (rear cargo door) | 1 | 2 | 2 | — |
| Whale-tail / paddle T-handles | 4–6 | 4–6 | 1–2 | 1–2 |
| Heavy-duty rear-door hinges | 4 | 6 | 6–8 | 4–8 |
| Concealed adjustable SUS304 hinges | 2 | — | — | 4–8 |
| SUS304 anti-tamper recessed cylinders | 2 | 2–4 | 4 | 1–2 |
| IP65/66 compression latches | 4–6 | 6–8 | 4 | 2–4 |
| Quarter-turn cam locks (service ports) | 2–4 | 2–4 | 2 | 2–4 |
| Food-grade EPDM door gasket (m) | ~6 | ~10 | ~12 | ~30 |
| Door retainer / hold-back hooks | 2 | 2 | 2 | 4–8 |
| Refrigeration unit access hinges | 4 | 4 | 4 | 4 |
| Vandal-resistant T-handles (IP65+) | 1 | 2 | 2 | 1 |
| ISO 17712 high-security seal lockcustom | — | optional | 1 | — |
| Internal release latch (cold-room safety)custom | — | — | — | 1 / door |
| –40 °C low-temperature hinge variantcustom | — | — | — | freezer rooms |
Hardware Kit by Form Factor
Refrigerated Light Truck Body
Refrigerated Semi-Trailer
Reefer ISO Container
Walk-In Cold Room
Custom Engineering for Cold Chain
Beyond the catalog, Yuxin engineers and supplies the niche hardware that reefer body builders, container OEMs, and walk-in cold room integrators ask for — from –40 °C low-temperature hinges to ISO 17712 high-security seal locks and pharma GDP audit-trail smart locks. Send specs, get a quote.
Compliance & Spec Standards
Related Products
YX-MS6018-1
YX-MSK86-1
Custom Cold-Chain Hardware?
Food-grade EPDM gaskets, -40°C low-temperature SUS304 hinges, GDP audit-trail smart locks, ISO 17712 container seals — send your specs for a custom quote.
Request a Quote